MBC2

Nintendo's MBC2 can be used to address up to 2 Mbit of ROM and 512×4 bit of internal RAM.

Pinout

Pin No.	Name	Type	Comment
28	VCC	PWR	I/O 5V supply
14	GND	PWR	I/O Ground supply
21	VCC_RAM	PWR	RAM supply
7	GND_RAM	PWR	RAM Ground supply
12Template:Ndash9	D3Template:NdashD0	I/O	Data Bus
1	RD	I	Low-Active Read Enable
27	WR	I	Low-Active Write Enable
26	CS	I	Low-Active Chip Select
15	RESET	I	Low-Active Asynchronous Reset
20, 22Template:Ndash25, 8, 6Template:Ndash2	A15Template:NdashA14, A8Template:NdashA0	I	Address Bus
16Template:Ndash19	RA17Template:NdashRA14	O	Upper ROM Address Lines
13	ROM_CS	O	Low-Active ROM Chip Select

Footprint: SOP127P1200X225-24

Remarks: All I/O pins are protected via diodes to VCC/GND. VCC and VCC_RAM both supply RAM -- probably depending on VCC voltage.

Registers

Write-Accessible Registers:

• 0b00-- ---0 ---- ----: RAM Enable register
• 0b00-- ---1 ---- ----: ROM Bank register
• 0b10-- ---a aaaa aaaa: Internal RAM

RAM Enable Register

XX XX XX XX D3 D2 D1 D0    0x00 @ reset
            \_________/
                 \-------- RAM Enable

A value of 0x0A enables RAM access, all other values disable RAM access.

ROM Bank Register

XX XX XX XX D3 D2 D1 D0    0x00 @ reset
            \_________/
                 \-------- ROM Bank

ROM Bank selects which bank is mapped to 0x4000-0x7FFF. The written value is zero-adjusted before output on RA17Template:NdashRA14.

Behavior

TODO